Other Products ｜Shure PSM 300 Pro Stereo Personal Monitor System with IEM

Key Features

For Live Stage, Theater
24-Bit Digital Audio
P3T Transmitter
P3RA Receiver
Includes SE215 In-Ear Monitors
Over 300' Coverage Range
One-Touch Scan and Sync Features

 
Overview

The Shure PSM 300 is a professional-quality wireless in-ear monitoring system that delivers 24-bit digital audio and offers wireless freedom to performers. It can be used in several environments for audio application such as live stage, theater, rehearsals, houses of worship, and more. It features an audio reference compander that ensures a clearer sound and provides lower noise and audio that have no artifacts. The wireless coverage range extends to over 300' and the system helps eliminate dropouts. The PSM 300 monitor system is easy to setup and operate; it offers one-touch frequency scan and sync to find and assign a clean wireless channel. Adjust the volume using MixMode or stereo mode to create a personal mix from two channels of audio.
Key Specs
Shure P3T Wireless Transmitter for PSM300

Performance

Frequency Range

G20: 488-512 MHz

RF Output Power

10, 20, 30 mWNote: varies by region

RF Output Impedance

50 Ohms (typical)

Transmission Range

300' (90 m)

Audio Input

Connector Type

1/4" TRS (6.35 mm)

Polarity

Tip positive with respect to ring

Configuration

Electronically balanced

Impedance

40 kOhms (actual)

Nominal Input Level

Switchable, +4 dBu, -10 dBV

Maximum Input Level

+4 dBu: +22 dBu-10 dBV: +12.2 dBu

Pin Assignments

Tip=hot, Ring=cold, Sleeve=ground

Phantom Power Protection

Up to 60 VDC

Audio Output

Connector Types

1/4" TRS (6.35 mm)

Configuration

Electronically balanced

Impedance

Connected directly to inputs

General

Antenna

1/4 wave, detachable

Power Requirement

12 to 15 VDC, 260 mA maximum

Dimensions

1.7 x 7.8 x 6.8" (43 x 198 x 172 mm)

Net Weight

27.6 oz (783 g)

Shure P3RA Wireless Bodypack Receiver for PSM300 System

Physical

Frequency Range

G20: 488-512 MHz

RF Sensitivity

Active: 2.2 μV (at 20 dB SINAD)

Image Rejection

> 90 dB

Adjacent Channel Rejection

> 60 dB

Intermodulation Attenuation

> 50 dB

Blocking

> 60 dB

Audio Output Power

80 mW per output (1 kHz at < 1% distortion, peak power, at 32 Ohms)

Minimum Load Impedance

16 Ohms

Headphone Output

1.8" (3.5 mm), stereo

Continuous Battery Life

4 to 5.5 hours, AA batteries5.5 to 7 hours, SB900 battery (available separately)

Dimensions

3.8 x 2.5 x 0.9" (99.0 x 66.0 x 23.00 mm)

Net Weight

6.9 oz (196 g), with batteries

Shure SE215 Pro Sound-Isolating Earphones (Clear)

Wearing Style

Dual Wired Earbud with Behind-Ear Cabling

Number of Drivers

1 per Earpiece 

Impedance

17 Ohms

Active Noise Cancellation

No

Frequency Response

22 Hz to 17.5 kHz

Built-In Mic

No

Audio Connector

1x 1/8" / 3.5 mm TRS Right-Angled

Included Adapter

No

What's in the Box:

Shure P3T Wireless Transmitter for PSM300

Detachable 1/4 Wave Antenna
Rackmount and Hardware Kit
BNC Cable
BNC Bulkhead Adapter
External Power Supply

Shure P3RA Wireless Bodypack Receiver for PSM300 System

Belt Clip
2 x AA Batteries
Battery Adapter Kit
Zipper Bag

Shure SE215 Pro Sound-Isolating Earphones (Clear)

Detachable Cable
3 x Pairs of Flex Sleeves (S/M/L)
3 x Pairs of Black Foam Sleeves (S/M/L)
Carrying Case

Limited 1-Year Manufacturer Warranty
Brand:ShureSKU:P3TRA215CLTags:microphone, microphones, Pro Audio, PSM 300, psm300, Shure PSM 300, shure psm 300 with se215