No image available
BMW S58 INTAKE MANIFOLD WITH PORT INJECTION｜ Other Products
USD 599.40
Other Products / General Merchandise / Other Products
Take your BMW S58 engine to the next level with the Project Gamma S58 Intake Manifold with Port Injection, engineered for enthusiasts and professional builders looking to maximize airflow, cooling efficiency, and fueling capacity.
Designed as a direct replacement for the factory plastic intake manifold, this premium cast aluminum manifold features a significantly larger integrated water-to-air intercooler core and built-in top-mount port injection provisions, making it the ideal upgrade for high-boost, ethanol, race fuel, and big turbo applications.
Whether you're building a 900+ horsepower street car or a dedicated race vehicle, the Project Gamma S58 Intake Manifold delivers the airflow, cooling, and fueling capability needed to support your performance goals.
Why Upgrade Your Factory S58 Intake Manifold?
The factory S58 intake manifold works well for stock power levels but quickly becomes a restriction as horsepower increases.
The Project Gamma manifold solves these limitations by offering:
Significantly increased airflow
Much larger integrated intercooler core
Integrated port injection system
Superior heat management
Strong cast aluminum construction
Excellent reliability under a big boost
The result is lower intake air temperatures, improved throttle response, greater fueling capacity, and more consistent horsepower during repeated pulls or track use.
Massive Integrated Intercooler Upgrade
Cooling plays a critical role in maintaining power on turbocharged engines.
The Project Gamma manifold incorporates a 20% large bar-and-plate water-to-air intercooler core that dramatically increases cooling efficiency over the OEM unit.Injectors and controller not included.
Benefits
✅ Increased airflow
✅ Lower intake air temperatures
✅ Improved throttle response
✅ Supports significantly higher horsepower
✅ Better fueling capability
✅ Reduced heat soak
✅ Excellent reliability under extreme boost
✅ Ready for future performance upgrades
Vehicle Fitment
BMW M2
2023+ G87 M2 (S58)
BMW M3
2021+ G80 M3
2021+ G80 M3 Competition
BMW M4
2021+ G82 M4
2021+ G82 M4 Competition
2022+ G83 M4 Convertible
BMW X3M
2020+ F97 X3M
2020+ F97 X3M Competition
BMW X4M
2020+ F98 X4M
2020+ F98 X4M Competition
Compatible with all BMW vehicles equipped with the S58 twin-turbo inline-6 engine.
Brand:BOOTMOD3 TUNING USATags:BMW S58 Intake Manifold, BMW S58 Intake Manifold with Port InjectionColor:Black, Red
View productDesigned as a direct replacement for the factory plastic intake manifold, this premium cast aluminum manifold features a significantly larger integrated water-to-air intercooler core and built-in top-mount port injection provisions, making it the ideal upgrade for high-boost, ethanol, race fuel, and big turbo applications.
Whether you're building a 900+ horsepower street car or a dedicated race vehicle, the Project Gamma S58 Intake Manifold delivers the airflow, cooling, and fueling capability needed to support your performance goals.
Why Upgrade Your Factory S58 Intake Manifold?
The factory S58 intake manifold works well for stock power levels but quickly becomes a restriction as horsepower increases.
The Project Gamma manifold solves these limitations by offering:
Significantly increased airflow
Much larger integrated intercooler core
Integrated port injection system
Superior heat management
Strong cast aluminum construction
Excellent reliability under a big boost
The result is lower intake air temperatures, improved throttle response, greater fueling capacity, and more consistent horsepower during repeated pulls or track use.
Massive Integrated Intercooler Upgrade
Cooling plays a critical role in maintaining power on turbocharged engines.
The Project Gamma manifold incorporates a 20% large bar-and-plate water-to-air intercooler core that dramatically increases cooling efficiency over the OEM unit.Injectors and controller not included.
Benefits
✅ Increased airflow
✅ Lower intake air temperatures
✅ Improved throttle response
✅ Supports significantly higher horsepower
✅ Better fueling capability
✅ Reduced heat soak
✅ Excellent reliability under extreme boost
✅ Ready for future performance upgrades
Vehicle Fitment
BMW M2
2023+ G87 M2 (S58)
BMW M3
2021+ G80 M3
2021+ G80 M3 Competition
BMW M4
2021+ G82 M4
2021+ G82 M4 Competition
2022+ G83 M4 Convertible
BMW X3M
2020+ F97 X3M
2020+ F97 X3M Competition
BMW X4M
2020+ F98 X4M
2020+ F98 X4M Competition
Compatible with all BMW vehicles equipped with the S58 twin-turbo inline-6 engine.
Brand:BOOTMOD3 TUNING USATags:BMW S58 Intake Manifold, BMW S58 Intake Manifold with Port InjectionColor:Black, Red
Product details
Take your BMW S58 engine to the next level with the Project Gamma S58 Intake Manifold with Port Injection, engineered for enthusiasts and professional builders looking to maximize airflow, cooling efficiency, and fueling capacity.
Designed as a direct replacement for the factory plastic intake manifold, this premium cast aluminum manifold features a significantly larger integrated water-to-air intercooler core and built-in top-mount port injection provisions, making it the ideal upgrade for high-boost, ethanol, race fuel, and big turbo applications.
Whether you're building a 900+ horsepower street car or a dedicated race vehicle, the Project Gamma S58 Intake Manifold delivers the airflow, cooling, and fueling capability needed to support your performance goals.
Why Upgrade Your Factory S58 Intake Manifold?
The factory S58 intake manifold works well for stock power levels but quickly becomes a restriction as horsepower increases.
The Project Gamma manifold solves these limitations by offering:
Significantly increased airflow
Much larger integrated intercooler core
Integrated port injection system
Superior heat management
Strong cast aluminum construction
Excellent reliability under a big boost
The result is lower intake air temperatures, improved throttle response, greater fueling capacity, and more consistent horsepower during repeated pulls or track use.
Massive Integrated Intercooler Upgrade
Cooling plays a critical role in maintaining power on turbocharged engines.
The Project Gamma manifold incorporates a 20% large bar-and-plate water-to-air intercooler core that dramatically increases cooling efficiency over the OEM unit.Injectors and controller not included.
Benefits
✅ Increased airflow
✅ Lower intake air temperatures
✅ Improved throttle response
✅ Supports significantly higher horsepower
✅ Better fueling capability
✅ Reduced heat soak
✅ Excellent reliability under extreme boost
✅ Ready for future performance upgrades
Vehicle Fitment
BMW M2
2023+ G87 M2 (S58)
BMW M3
2021+ G80 M3
2021+ G80 M3 Competition
BMW M4
2021+ G82 M4
2021+ G82 M4 Competition
2022+ G83 M4 Convertible
BMW X3M
2020+ F97 X3M
2020+ F97 X3M Competition
BMW X4M
2020+ F98 X4M
2020+ F98 X4M Competition
Compatible with all BMW vehicles equipped with the S58 twin-turbo inline-6 engine.
Brand:BOOTMOD3 TUNING USATags:BMW S58 Intake Manifold, BMW S58 Intake Manifold with Port InjectionColor:Black, Red
Designed as a direct replacement for the factory plastic intake manifold, this premium cast aluminum manifold features a significantly larger integrated water-to-air intercooler core and built-in top-mount port injection provisions, making it the ideal upgrade for high-boost, ethanol, race fuel, and big turbo applications.
Whether you're building a 900+ horsepower street car or a dedicated race vehicle, the Project Gamma S58 Intake Manifold delivers the airflow, cooling, and fueling capability needed to support your performance goals.
Why Upgrade Your Factory S58 Intake Manifold?
The factory S58 intake manifold works well for stock power levels but quickly becomes a restriction as horsepower increases.
The Project Gamma manifold solves these limitations by offering:
Significantly increased airflow
Much larger integrated intercooler core
Integrated port injection system
Superior heat management
Strong cast aluminum construction
Excellent reliability under a big boost
The result is lower intake air temperatures, improved throttle response, greater fueling capacity, and more consistent horsepower during repeated pulls or track use.
Massive Integrated Intercooler Upgrade
Cooling plays a critical role in maintaining power on turbocharged engines.
The Project Gamma manifold incorporates a 20% large bar-and-plate water-to-air intercooler core that dramatically increases cooling efficiency over the OEM unit.Injectors and controller not included.
Benefits
✅ Increased airflow
✅ Lower intake air temperatures
✅ Improved throttle response
✅ Supports significantly higher horsepower
✅ Better fueling capability
✅ Reduced heat soak
✅ Excellent reliability under extreme boost
✅ Ready for future performance upgrades
Vehicle Fitment
BMW M2
2023+ G87 M2 (S58)
BMW M3
2021+ G80 M3
2021+ G80 M3 Competition
BMW M4
2021+ G82 M4
2021+ G82 M4 Competition
2022+ G83 M4 Convertible
BMW X3M
2020+ F97 X3M
2020+ F97 X3M Competition
BMW X4M
2020+ F98 X4M
2020+ F98 X4M Competition
Compatible with all BMW vehicles equipped with the S58 twin-turbo inline-6 engine.
Brand:BOOTMOD3 TUNING USATags:BMW S58 Intake Manifold, BMW S58 Intake Manifold with Port InjectionColor:Black, Red
Product information
COL-b12da57e3bc67e6b88435d1dbafa1e599136f2b4
Other Products / General Merchandise / Other Products
Other Products / General Merchandise / Other Products
