No image available
Andover Audio: Spinbase Max 2 Turntable Speaker System｜ Electronic Accessories
USD 149.70
Electronics / Electronic Accessories / Electronic Accessories
LAB POINTS
space-saving speaker system specially designed for turntable platform usage; also includes Bluetooth connectivity
Max model features upgraded 100W power + (6) speaker system
utilizes Isogroove Technology that vir tually eliminates vibration + feedback issues (more on this below)
6-speaker system with four 3.5" woofers + two silk dome tweeters
loud 100W power recommended for small - medium sized rooms
270º panoramic sound
connect to the speaker via Bluetooth when you are not listening to vinyl
features built-in phono preamp, can be switched off for use w/ turntables that have a built-in preamp
includes bass + treble EQ controls
full array analog + digital inputs
stealth display illuminates beneath heathered fabric grille
minimal design, sturdy metal construction, weighs 15 lbs.
SPINBASE Max 2 vs. SPINBASE 2
SpinBase Max 2 increases wattage (100W vs. 70W) to power greater sound
SpinBase Max 2 features newly designed woofers and adds an additional woofer for a total of (4)
SpinBase Max 2 reaches a deeper low frequency (50Hz vs 60Hz) for a wider frequency range
SpinBase Max 2 is 1" taller and 4 lbs heavier (4.25" H vs 3.25" H; 15 vs 11 lbs) to accommodate larger drivers, but still maintains the same length + width
"IsoGroove is an innovative technology that eliminates the age-old issue of turntables creating a feed back loop with speakers. The technology allows Spinbase to be placed directly underneath your turntable, serving as both an elegant platform and wide-range loudspeaker system." - Andover Audio
ISOGROOVE TECHNOLOGY EXPLAINED
IsoGroove uses (3) main technologies in combination. It was developed by a team that developed components for Cambridge SoundWorks, A/D/S and JBL.
The first and most significant is the speakers are arrayed such that the basic mechanical vibrations cancel each other.
The surface was analyzed for vibration patterns. Strategically placed bracing minimize the vibrations even further.
Lastly, a DSP (digital signal processor) is utilized at low frequencies to ensure that low frequencies are always balanced to provide maximum vibration cancellation regardless of musical content.
KEY FEATURES
speaker type: active speaker for everyday listening
peak power output: 100W
frequency response: 50 Hz - 20 kHz
high frequency driver: 3/4" soft dome
low frequency driver: 13.5" woofer
EQ: 2-band (high + low)
wired inputs: 3.5mm line, RCA phono + ground, Optical (TOSLINK), USB Type-A
wireless inputs: Bluetooth
outputs: Subwoofer
phono preamp: yes
headphone output: yes, 3.5mm
subwoofer out: yes, 3.5mm
dimensions: 18.0" (w) x 4.25" (h) x 14.5" (d) / 45.7 x 10.8 x 34.3cm
weight (total): 15.0 lb / 6.8 kg
COMES WITH
remote control
RCA cable + ground
RCA to 3.5mm audio cable
Brand:Andover AudioCategory:_STEREO-COMP-hifispeakerSKU:sp-892-black-maxTags:active speakers, components, phono preamps, speakerstype:Black, White
View productspace-saving speaker system specially designed for turntable platform usage; also includes Bluetooth connectivity
Max model features upgraded 100W power + (6) speaker system
utilizes Isogroove Technology that vir tually eliminates vibration + feedback issues (more on this below)
6-speaker system with four 3.5" woofers + two silk dome tweeters
loud 100W power recommended for small - medium sized rooms
270º panoramic sound
connect to the speaker via Bluetooth when you are not listening to vinyl
features built-in phono preamp, can be switched off for use w/ turntables that have a built-in preamp
includes bass + treble EQ controls
full array analog + digital inputs
stealth display illuminates beneath heathered fabric grille
minimal design, sturdy metal construction, weighs 15 lbs.
SPINBASE Max 2 vs. SPINBASE 2
SpinBase Max 2 increases wattage (100W vs. 70W) to power greater sound
SpinBase Max 2 features newly designed woofers and adds an additional woofer for a total of (4)
SpinBase Max 2 reaches a deeper low frequency (50Hz vs 60Hz) for a wider frequency range
SpinBase Max 2 is 1" taller and 4 lbs heavier (4.25" H vs 3.25" H; 15 vs 11 lbs) to accommodate larger drivers, but still maintains the same length + width
"IsoGroove is an innovative technology that eliminates the age-old issue of turntables creating a feed back loop with speakers. The technology allows Spinbase to be placed directly underneath your turntable, serving as both an elegant platform and wide-range loudspeaker system." - Andover Audio
ISOGROOVE TECHNOLOGY EXPLAINED
IsoGroove uses (3) main technologies in combination. It was developed by a team that developed components for Cambridge SoundWorks, A/D/S and JBL.
The first and most significant is the speakers are arrayed such that the basic mechanical vibrations cancel each other.
The surface was analyzed for vibration patterns. Strategically placed bracing minimize the vibrations even further.
Lastly, a DSP (digital signal processor) is utilized at low frequencies to ensure that low frequencies are always balanced to provide maximum vibration cancellation regardless of musical content.
KEY FEATURES
speaker type: active speaker for everyday listening
peak power output: 100W
frequency response: 50 Hz - 20 kHz
high frequency driver: 3/4" soft dome
low frequency driver: 13.5" woofer
EQ: 2-band (high + low)
wired inputs: 3.5mm line, RCA phono + ground, Optical (TOSLINK), USB Type-A
wireless inputs: Bluetooth
outputs: Subwoofer
phono preamp: yes
headphone output: yes, 3.5mm
subwoofer out: yes, 3.5mm
dimensions: 18.0" (w) x 4.25" (h) x 14.5" (d) / 45.7 x 10.8 x 34.3cm
weight (total): 15.0 lb / 6.8 kg
COMES WITH
remote control
RCA cable + ground
RCA to 3.5mm audio cable
Brand:Andover AudioCategory:_STEREO-COMP-hifispeakerSKU:sp-892-black-maxTags:active speakers, components, phono preamps, speakerstype:Black, White
Product details
LAB POINTS
space-saving speaker system specially designed for turntable platform usage; also includes Bluetooth connectivity
Max model features upgraded 100W power + (6) speaker system
utilizes Isogroove Technology that vir tually eliminates vibration + feedback issues (more on this below)
6-speaker system with four 3.5" woofers + two silk dome tweeters
loud 100W power recommended for small - medium sized rooms
270º panoramic sound
connect to the speaker via Bluetooth when you are not listening to vinyl
features built-in phono preamp, can be switched off for use w/ turntables that have a built-in preamp
includes bass + treble EQ controls
full array analog + digital inputs
stealth display illuminates beneath heathered fabric grille
minimal design, sturdy metal construction, weighs 15 lbs.
SPINBASE Max 2 vs. SPINBASE 2
SpinBase Max 2 increases wattage (100W vs. 70W) to power greater sound
SpinBase Max 2 features newly designed woofers and adds an additional woofer for a total of (4)
SpinBase Max 2 reaches a deeper low frequency (50Hz vs 60Hz) for a wider frequency range
SpinBase Max 2 is 1" taller and 4 lbs heavier (4.25" H vs 3.25" H; 15 vs 11 lbs) to accommodate larger drivers, but still maintains the same length + width
"IsoGroove is an innovative technology that eliminates the age-old issue of turntables creating a feed back loop with speakers. The technology allows Spinbase to be placed directly underneath your turntable, serving as both an elegant platform and wide-range loudspeaker system." - Andover Audio
ISOGROOVE TECHNOLOGY EXPLAINED
IsoGroove uses (3) main technologies in combination. It was developed by a team that developed components for Cambridge SoundWorks, A/D/S and JBL.
The first and most significant is the speakers are arrayed such that the basic mechanical vibrations cancel each other.
The surface was analyzed for vibration patterns. Strategically placed bracing minimize the vibrations even further.
Lastly, a DSP (digital signal processor) is utilized at low frequencies to ensure that low frequencies are always balanced to provide maximum vibration cancellation regardless of musical content.
KEY FEATURES
speaker type: active speaker for everyday listening
peak power output: 100W
frequency response: 50 Hz - 20 kHz
high frequency driver: 3/4" soft dome
low frequency driver: 13.5" woofer
EQ: 2-band (high + low)
wired inputs: 3.5mm line, RCA phono + ground, Optical (TOSLINK), USB Type-A
wireless inputs: Bluetooth
outputs: Subwoofer
phono preamp: yes
headphone output: yes, 3.5mm
subwoofer out: yes, 3.5mm
dimensions: 18.0" (w) x 4.25" (h) x 14.5" (d) / 45.7 x 10.8 x 34.3cm
weight (total): 15.0 lb / 6.8 kg
COMES WITH
remote control
RCA cable + ground
RCA to 3.5mm audio cable
Brand:Andover AudioCategory:_STEREO-COMP-hifispeakerSKU:sp-892-black-maxTags:active speakers, components, phono preamps, speakerstype:Black, White
space-saving speaker system specially designed for turntable platform usage; also includes Bluetooth connectivity
Max model features upgraded 100W power + (6) speaker system
utilizes Isogroove Technology that vir tually eliminates vibration + feedback issues (more on this below)
6-speaker system with four 3.5" woofers + two silk dome tweeters
loud 100W power recommended for small - medium sized rooms
270º panoramic sound
connect to the speaker via Bluetooth when you are not listening to vinyl
features built-in phono preamp, can be switched off for use w/ turntables that have a built-in preamp
includes bass + treble EQ controls
full array analog + digital inputs
stealth display illuminates beneath heathered fabric grille
minimal design, sturdy metal construction, weighs 15 lbs.
SPINBASE Max 2 vs. SPINBASE 2
SpinBase Max 2 increases wattage (100W vs. 70W) to power greater sound
SpinBase Max 2 features newly designed woofers and adds an additional woofer for a total of (4)
SpinBase Max 2 reaches a deeper low frequency (50Hz vs 60Hz) for a wider frequency range
SpinBase Max 2 is 1" taller and 4 lbs heavier (4.25" H vs 3.25" H; 15 vs 11 lbs) to accommodate larger drivers, but still maintains the same length + width
"IsoGroove is an innovative technology that eliminates the age-old issue of turntables creating a feed back loop with speakers. The technology allows Spinbase to be placed directly underneath your turntable, serving as both an elegant platform and wide-range loudspeaker system." - Andover Audio
ISOGROOVE TECHNOLOGY EXPLAINED
IsoGroove uses (3) main technologies in combination. It was developed by a team that developed components for Cambridge SoundWorks, A/D/S and JBL.
The first and most significant is the speakers are arrayed such that the basic mechanical vibrations cancel each other.
The surface was analyzed for vibration patterns. Strategically placed bracing minimize the vibrations even further.
Lastly, a DSP (digital signal processor) is utilized at low frequencies to ensure that low frequencies are always balanced to provide maximum vibration cancellation regardless of musical content.
KEY FEATURES
speaker type: active speaker for everyday listening
peak power output: 100W
frequency response: 50 Hz - 20 kHz
high frequency driver: 3/4" soft dome
low frequency driver: 13.5" woofer
EQ: 2-band (high + low)
wired inputs: 3.5mm line, RCA phono + ground, Optical (TOSLINK), USB Type-A
wireless inputs: Bluetooth
outputs: Subwoofer
phono preamp: yes
headphone output: yes, 3.5mm
subwoofer out: yes, 3.5mm
dimensions: 18.0" (w) x 4.25" (h) x 14.5" (d) / 45.7 x 10.8 x 34.3cm
weight (total): 15.0 lb / 6.8 kg
COMES WITH
remote control
RCA cable + ground
RCA to 3.5mm audio cable
Brand:Andover AudioCategory:_STEREO-COMP-hifispeakerSKU:sp-892-black-maxTags:active speakers, components, phono preamps, speakerstype:Black, White
Product information
COL-524afe419481314260e3c41e5b56d6f7da25e578
Electronics / Electronic Accessories / Electronic Accessories
Electronics / Electronic Accessories / Electronic Accessories
![Bijzettafel Ledepid ronde tafelblad naturel [en.casa]｜ Other Products](https://cdn.shopify.com/s/files/1/0902/7466/0733/files/Beistelltisch-Nebentisch-Sofatisch-Telefontisch_PXCH-0085_beispiel.jpg)